Betofix RM

<b>Remmers Betofix RM – Fast Setting Concrete Repair Mortar (25kg)</b><br> <br> Remmers Betofix RM is a fast-setting PCC (Polymer Cement Concrete) repair mortar designed for the rapid repair and cosmetic restoration of concrete surfaces. Ideal for professional contractors, it is perfect for repairing blowholes, honeycombing, surface defects, chipped edges and small areas of damaged concrete on both internal and external projects.<br> <br> Its fine-grain formulation provides a smooth finish that can be easily trowelled, feather edged and sponge finished, making it ideal for preparing concrete surfaces before protective coatings or decorative finishes are applied. The rapid setting properties allow repairs to be completed quickly, helping to minimise downtime on site.<br> <br> Betofix RM offers excellent adhesion, very low shrinkage and outstanding resistance to freeze/thaw cycles, providing durable repairs that stand the test of time. Suitable for vertical, horizontal and overhead applications, it is an excellent choice for repairing concrete façades, walls, ceilings, soffits and precast concrete elements.<br> <br> <b>Key Features</b><br> Fast-setting PCC concrete repair mortar<br> Ideal for cosmetic and non-structural concrete repairs<br> Fine-grain finish for smooth surface repairs<br> Excellent adhesion to prepared concrete<br> Very low shrinkage<br> Suitable for overhead applications<br> Freeze/thaw resistant<br> Easy to trowel, feather edge and sponge finish<br> Suitable for internal and external use<br> Complies with EN 1504-3 requirements for non-structural concrete repairs<br> <br> <b>Typical Applications</b><br> Repairing blowholes and honeycombing<br> Filling pores and surface imperfections<br> Repairing chipped concrete edges<br> Concrete patch repairs<br> Levelling uneven concrete surfaces<br> Cosmetic concrete restoration<br> Repairing walls, ceilings and soffits<br> Preparing concrete before protective coatings<br> <br> <b>Coverage</b><br> Coverage is approximately 1.2kg per m² per mm of thickness.<br> A 25kg bag will cover approximately:<br> - 20.8m2 at 1mm<br> - 4.1m2 at 5mm<br> - 2.0m2 at 10mm<br> <br> Coverage will vary depending on the condition of the substrate and application thickness.<br> <br> <b>Application</b><br> The concrete substrate should be clean, sound and free from dust, loose material and contaminants. Pre-wet the substrate until damp with no standing water. Mix mechanically with clean water to achieve a smooth, workable consistency before applying by trowel or filling knife.<br> <br> <b>Storage</b><br> Store unopened in a cool, dry environment. Shelf life is up to 12 months when stored correctly in its original packaging.